FORWARDING RECEIVED DATA TO PRESET DESTINATIONS(INBOUND ROUTING SETTINGS)
Overview
Received Internet faxes are automatically forwarded to a fax destination number, an Internet fax address, an e-mail address, a file server address, a desktop address, or a network folder address.
Received data can be forwarded to the specified destinations without being printed.
Received data can be forwarded to the specified destinations without being printed.
![](./concept/fc_Inbound-Routing.jpg)
In setting mode (Web version), configure the inbound routing settings. For the procedure for accessing the setting mode (Web version), see Quick Start Guide.
The following explanation assumes that the setting mode (Web version) has been accessed with administrator rights.
![](../images/ic_Memo.png)
In "Setting mode", select [Application Settings] → [Forward Received Data], and tap [Valid]/[Invalid] on the displayed forwarding table to switch the settings.
![](../images/ic_Limit.png)
- When faxes forwarded using this function are printed at the forwarding destination, the date and time of reception cannot be printed on the faxes. ("Receiving Date & Time Print" is disabled.)
- The received data is not forwarded to a hyperlink destination that is registered in the specified address.
Operation
![](../images/step_01.jpg)
![](../images/step_02.jpg)
![](../images/ic_Memo.png)
![](./icon/key_Checkbox-On(Sys)_S.jpg)
- Disable Registration of Forward Table
- Disable Change/Delete of Forward Table
- Disable Change of Forward Approval
- [Always Print]: Always prints received data before forwarding the data.
- [Print at Error]: Prints received data only when an error prevents forwarding.
- [Save Only at Error]: Saves received data only when an error prevents forwarding. For the saved data, the error address can be confirmed and the data can be resent.
![](../images/step_03.jpg)
![](../images/step_04.jpg)
The sender address or number you entered will be added to the "Address to be Entered" list.
- Enter the address directly (maximum of 1500 characters) or select the address from a global address book by clicking the [Global Address Search] button.
- To store multiple sender addresses or fax numbers, repeat these steps.
![](../images/ic_Memo.png)
- If you wish to have only faxes from specified addresses forwarded, store the desired sender addresses. Send addresses stored here can be selected from a list when you store a forwarding table.
- A maximum of 500 sender numbers/addresses can be stored.
- To delete an entered address, select the address in "Address to be Entered" and click the [Delete] button.
![](../images/step_05.jpg)
![](../images/step_06.jpg)
![](../images/step_07.jpg)
![](../images/ic_Memo.png)
![](../images/step_08.jpg)
- To forward all received data, select [Forward All Received Data].
- To forward only data received from specific senders, select [Forward Received Data from Below Sender]. To forward all data except data from specific senders, select [Forward Received Data from Senders except Below]. Select the appropriate senders from the list and click the [Add] button.
![](../images/ic_Memo.png)
![](../images/step_09.jpg)
- To always forward received data, select [Always Forward].
- To specify a day and time on which received data will be forwarded, select [Forward on Selected Day & Time] and select the checkbox (
) of the desired day of the week. To specify a time, select the [Set Forwarding Time] checkbox (
) and specify the time.
![](../images/ic_Memo.png)
![](../images/step_10.jpg)
The format can be set separately for each forwarding address (for each of forwarding addresses 1, 2, and 3 in the table).
![](../images/ic_Memo.png)
- Images forwarded in TIFF format may not be displayed correctly in some recipient environments.
In this event, change the file format to PDF. - If the Internet fax address is selected as a recipient, data is forwarded in TIFF regardless of the specified format.
- If a fax number is selected as a recipient, the file format is ignored.
![](../images/step_11.jpg)
You can specify multiple registered addresses or telephone numbers from the address book of the machine.
Up to 1,000 recipients can be registered for Recipients 1, 2, and 3 in total. When you select the recipients from the address book, up to 400 recipients can be registered for network folder, FTP/Desktop, Internet fax, and fax.
Up to 1,000 recipients can be registered for Recipients 1, 2, and 3 in total. When you select the recipients from the address book, up to 400 recipients can be registered for network folder, FTP/Desktop, Internet fax, and fax.
![](../images/step_12.jpg)
- Specify this information if necessary.
- Enter an e-mail address, an Internet fax address, a direct SMTP address, or a fax number directly and tap the [Add] key.
- When you specify an e-mail address or a fax number, you can use the global address search.
- When you specify a fax number, also specify the sending line and international correspondence mode.
- When enter the recipients directly, up to 100 recipients can be registered for e-mail address, network folder, FTP/Desktop, Internet fax, and fax.
![](../images/step_13.jpg)
![](../images/step_14.jpg)
![](../images/step_15.jpg)
The forwarding permission settings that appear here are linked to the forwarding conditions set in step 10.
If you wish to use different forwarding conditions than those set in step 10, set the forwarding permission settings.
If you wish to use different forwarding conditions than those set in step 10, set the forwarding permission settings.
![](../images/ic_Memo.png)
- To use the inbound routing function, enable the forwarding tables that you wish to use from among the stored tables.
- To delete a forwarding table, click the checkbox next to the table name so that it is selected (
) and click [Delete].
![](../images/step_16.jpg)