CONDITION SETTINGS
If you print data in an environment where the printer driver is not used (that is, if you print data using the MS-DOS system or if you print data using the PC that does not have the provided printer driver installed), set the detailed printing conditions. (However, the "Disable Blank Page Print" function will be effective even when the PCL printer driver is used.)
![](../images/ic_Memo.png)
Settings
Item | Setting |
---|---|
Copies | 1 - 999 sets |
Orientation |
|
Default Paper Size | 8-1/2" x 14", 8-1/2" x 13-2/5" (216 mm x 340 mm), 216 mm x 330 mm (8-1/2" x 13"), 216 mm x 343 mm (8-1/2" x 13-1/2"), 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", A3W, A3, B4, A4, B5, A5, 12" x 18", 11" x 17", 8K, 16K |
Default Output Tray |
|
Default Paper Type | Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Color |
Initial Resolution Settings |
|
Disable Blank Page Print |
|
Line Thickness*3 | 0 to 9 |
2-Sided Print |
|
N-Up Print*4 | N-Up
|
Layout
|
|
Fit To Page*7 |
|
Output |
|
Quick File |
|
- *1
- When the finisher is installed
- *2
- When the saddle finisher (large stacker) or finisher (large stacker) is installed
- *3
- This setting is used to adjust the line width of vector graphics. Except for CAD and other specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot.
- *4
- Paper sizes that can be used with this function are 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, B4, and A4. (This function may not take effect with some print methods.)
- *5
- Can be selected when 2-Up is selected.
- *6
- Can be selected when 4-Up/8-Up is selected.
- *7
- Only effective when printing PDF, JPEG, and TIFF files.
- *8
- When a punch module is installed