CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM
Overview
If black lines appear even after you have cleaned the document glass and automatic document feeder, use the charger cleaner to clean the main charger that charges the photoconductive drum.
![](../images/ic_Memo.png)
- If cleaning the main charger of the photoconductive drum does not solve the problem, pull the knob out and push it back three more times.
- When pulling and pushing the knob to clean the charger, pull and push the knob slowly from one end to the other.
Operation
![](../images/step_01.jpg)
![](./illust/Toner-cartridge01.jpg)
![](../images/step_02.jpg)
Press up the toner collection container release lever.
![](./illust/Change_tonerbox02-2.jpg)
The toner collection container will fall forward as shown.
Gently support the container with your hands as you let it fall forward as far as it will go.
![](./illust/Change_tonerbox02-2.jpg)
The toner collection container will fall forward as shown.
Gently support the container with your hands as you let it fall forward as far as it will go.
![](./illust/Change_tonerbox03.jpg)
![](../images/step_03.jpg)
Gently pull the charger cleaner all the way up, and gently push it in.
![](./illust/Charger_Cleaner-1.jpg)
![](../images/step_04.jpg)
Push the container in until it clicks into place.
![](./illust/Change_tonerbox08.jpg)
![](../images/step_05.jpg)
![](./illust/Toner-cartridge09.jpg)