SPECIFYING THE ORIGINAL SIZE
Overview
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
Set an original size before scanning the original.
Operation
Specifying an inch original size
Tap the [Original] key. 
Tap the [Inch] tab.
Tap the appropriate original size key.
After the settings are completed, tap 
.
.
Specifying an AB original size
Tap the [Original] key.
Tap the [AB] tab.
Tap the appropriate original size key.
After the settings are completed, tap .
.
Specifying a non-standard original size
Tap the [Original] key.
Tap the [Direct Entry] tab.
Specify the original size.
- Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
- It is convenient to use
to finely adjust the entered size.
Tap the [Execute] key.
On the base screen, check that the specified size is displayed on the [Original] key.
After the settings are completed, tap.
After the settings are completed, tap
.