STORING FREQUENTLY USED ORIGINAL SIZES
Overview
Store the frequently used non-standard original sizes. This section explains how to store, retrieve, change, and delete non-standard original sizes.
- The stored original size will be retained even if the main power is turned off.
- Up to 12 non-standard original sizes can be stored.
Operation
Storing original sizes (editing/clearing)
Tap the [Original] key.
Tap the [Custom Size] tab.
Tap the [Store/Delete] key.
Tap a key (
) for storing a custom original size.
Tap a key that does not show a size.
To edit or clear a previously stored key:
Tap the key that you want to edit or clear. The following screen will appear.
- To edit the key, tap the [Modify] key and go to the next step.
- To clear the key, tap the [Delete] key. Make sure that the original size has been cleared and tap the
key.
Specify the original size.
- Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
- It is convenient to use
to finely adjust the entered size.
Tap the [Execute] key.
After the settings are completed, tap the key, and check that the key of the size stored on the original screen is added properly. After you have checked it, tap .
key, and check that the key of the size stored on the original screen is added properly. After you have checked it, tap .
To cancel the operation
Tap the [CA] key.
Retrieving a stored original size
Tap the [Original] key.
Tap the [Custom Size] tab. Tap the key of the original size that you wish to retrieve.
After selecting the key of the original size, tap the key.
key.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the operation
Tap the [CA] key.
