MAKING A POSTER-SIZED COPY(MULTI-PAGE ENLARGEMENT)

Overview

This function separately copies an enlarged original image on multiple sheets.

Multi-Page Enlargement must be specified before scanning the original.
Place an original on the document glass.
Overlap of sections of image
- There will be a margin around the edges of each copy.
- Areas for overlapping the copies will be created at the leading and trailing edges of each copy.
The paper size, number of sheets required for the enlarged image, and the ratio are automatically selected based on the selected original size and enlargement size. (The paper size and ratio cannot be selected manually.)

Tap the [Others] key, and tap the [Multi-Page Enlargement] key.

Select the [AB] or [Inch] tab to meet the original size for multi-page enlargement, and tap the key that meets the original size.

Tapping the key of the original size displays the keys that show the available enlargement size, copy paper size, and number of sheets.

Tap the key of the size you want to enlarge the original to.

The original orientation appears.
After the settings are completed, tap

and [Back] keys in sequence.

When printing the copy image and margin border, set the [Print Paste Position Mark] checkbox to

To cancel the multi-page enlargement setting:
Tap the [Clear] key.
To return the ratio to 100%:
Tap the [Copy Ratio] key on the base screen to display the ratio menu, and then tap the [100%] key.

Place the original on the document glass based on the orientation displayed on the screen, and tap the [Preview] key.

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

Tap the [Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies entry key to specify the number of copies.