PRINTING IMAGE SENDING ACTIVITY REPORTS
You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred.
The most recent 200 transactions are included in the report.
You can have the machine print the Image Sending Activity Report each time the number of transactions reaches 200, or at a specified time (once a day only).
The most recent 200 transactions are included in the report.
You can have the machine print the Image Sending Activity Report each time the number of transactions reaches 200, or at a specified time (once a day only).
To configure the image sending activity report:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Activity Report Print Select Setting].
To print the communication record,
1. Display the job status screen and tap the [Complete] key.
The contents of the Image Sending Activity Report are erased when the report is printed, and thus it cannot be reprinted.
When the Image Sending Activity Report is erased, the log is reset. The Image Sending Activity Report each time the number of transactions reach 200 again, the report is printed. When the Activity Report Print Select Setting is disabled, the Activity Report will not be printed even reached 200, the Activity Report will be erased.