AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL(2-SIDED ORIGINAL)

Overview

The automatic document feeder is used to automatically scan both sides of an original.
The settings on 2-sided scanning are cleared when transmission has completed.

Operation

After tapping the [Original] key, tap the [2-Sided Tablet] key or the [2-Sided Book] key.
See the figure on the right to check the binding edge of the original and select the key to be tapped.
Tap the [Image Orientation] key with the same orientation as the placed original.
If this setting is not correct, a suitable image may not be transmitted.
After the settings are completed, tap .
To cancel 2-sided scanning:
Tap the [2-Sided original type Tablet] key or the [2-Sided original type Book] key that has been forcibly displayed and cancel the display.
Back to top