AUTO CALIBRATION
The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).
Default settings selected with these settings apply to all functions of the machine (not just the copy function).
AUTO CALIBRATION
Performs automatic correction when the black copies is off. The machine prints a test patch, the test patch is scanned, and the black is automatically corrected.
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic calibration. Place the test patch on the document glass as shown below (so that the thin line at the edge of the page is to the left).
After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic calibration. Place the test patch on the document glass as shown below (so that the thin line at the edge of the page is to the left).
Lay copy paper (about five sheets) that is the same size as the test patch on top of the placed test patch, gently close the automatic document feeder, and tap the [Execute] key.
If the black is still off after performing Auto Calibration, repeating Auto Calibration once again may improve the black.