THE IMAGE IS TOO LIGHT OR TOO DARK
If you are unable to solve a problem using the solutions in this manual, press the [Power] button and then turn the main power switch to the "
"position. Wait at least 10 seconds and then turn the main power switch to the "
"position. After the main power indicator color changes to green, press the [POWER] button.
"position. Wait at least 10 seconds and then turn the main power switch to the ""position. After the main power indicator color changes to green, press the [POWER] button.
When the background color of the job status display at the upper right corner of the touch panel is not gray, do not switch off the main power switch or unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost.
| Point to check | Solution |
|---|---|
| Does the image (particularly a photo) need correction? (Windows) |
Check the settings of the printer driver. Correct brightness and contrast with [Color Adjustment Settings] on the [Advanced] tab of the printer driver. Use these settings to make simple corrections in a case such as when image editing software is not installed on your computer. |