TRANSMISSION DOES NOT BEGIN AT THE SPECIFIED TIME
If you are unable to solve a problem using the solutions in this manual, press the [Power] button and then turn the main power switch to the "
"position. Wait at least 10 seconds and then turn the main power switch to the "
"position. After the main power indicator color changes to green, press the [POWER] button.
"position. Wait at least 10 seconds and then turn the main power switch to the ""position. After the main power indicator color changes to green, press the [POWER] button.
When the background color of the job status display at the upper right corner of the touch panel is not gray, do not switch off the main power switch or unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost.
| Point to check | Solution |
|---|---|
| Is the machine's clock set to the correct time? | Set the clock to the correct time. "Setting mode" → [System Settings] → [Default Settings] → [Clock Adjust] |
| Is a transmission in progress? | If another transmission is in progress when the specified time arrives, the timer operation will begin after that transmission is finished. |