STAPLING DOES NOT TAKE PLACE(INCLUDING SADDLE STITCH)
| Point to check | Solution |
|---|---|
| Does a message appear instructing you to check the staple unit? | Remove jammed staples. - "REMOVING MISFEEDS" in "OPERATIONS COMMON TO ALL MODES" |
| Does a message appear instructing you to add staples? | Replace the staple cartridge. Do not forget to replace the staple case. - "REMOVING MISFEEDS" in "OPERATIONS COMMON TO ALL MODES" |
| Is a different width of paper mixed in? | To perform mixed size stapling, use paper of the same width and select the [Same Width] setting. Stapling is not possible when paper of different widths are mixed together. When copying, select [Same Width] for [Mixed Size Original] in [Other]. |
| Are there more sheets than can be stapled at once? | For the maximum number of sheets that can be stapled, see "SPECIFICATIONS" in Quick Start Guide. |
| Is a paper size that cannot be stapled included in the print job? | For the paper size that can be stapled, see "SPECIFICATIONS" in Quick Start Guide. |
| Is the paper type setting of the tray selected in the printer driver set to a paper type that cannot be stapled? | Check the paper type settings in the machine and select a tray that has paper that can be used for stapling*. Click the [Details] button in [Paper Selection] on the [Paper Select] tab of the printer properties window and check the paper type setting of each tray.
|
| Have functions been disabled by the administrator? | Check with your administrator. Some functions may have been disabled in the setting mode. |