ENABLE / DISABLE SETTINGS

Disable Blank Page Print

Disables to print a blank page.

Disabling of Printing by Invalid User

Printing by users whose information is not stored in the machine, such as printing without entering valid user information in the printer driver or printing of a file on an FTP server in Setting mode (Web version), can be prohibited.

Cancel Auto Clear Timer

Disables the Auto Clear mode.

Disabling of Job Priority Operation

Disables raising priority for printing and sending jobs from the job status screen.

Disabling of Bypass Printing

Disables bypass printing (printing other jobs ahead of a job that has been stopped^* because the paper required for the job is not in any of the trays).
* This option is ignored when paper runs out during the job.

Disable Auto Key Repeat

Disables the Auto Key Repeat function.

Disabling of Clock Adjustment

Disables the date and time from being changed.

Disabling of Covers/Inserts Mode

Disables the use of the covers and inserts function.

Disabling of Manual Finishing

Disables Manual Finishing

Disabling of Document Feeder

Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the setting is enabled, scanning is still possible using the document glass.)

Disabling of Duplex

This is used to disable 2-sided printing, such as when the duplex module malfunctions.

Disabling of Large Capacity Cassette

This setting is used to prohibit the use of the large capacity tray, such as when it malfunctions.

Disabling of Tray Settings

Disables the tray settings.

Disabling of Bypass-Tray

This setting is used to prohibit the use of the bypass tray.

Disabling of Inserter

This setting is used to prohibit the use of the inserter.

Disabling of Offset

Disables an offset.

Disabling of Stapler

This setting is used to prohibit use of the stapler, such as when the stapler of the finisher or saddle finisher malfunctions.

Disabling of Punch

This setting is used to prohibit the use of punch, such as when the punch module of finisher or saddle finisher malfunctions.

Disabling of Folding Unit

This setting is used to prohibit the use of the folding unit.

Disabling of Trimming Module

This setting is used to prohibit the use of the trimming module.

Disabling of Stacker 1

This setting is used to disable the stack tray of the primary high capacity stacker.

Disabling of Stacker 2

This setting is used to disable the stack tray of the secondary high capacity stacker.

Disabling of Master Machine Mode

This setting is used to prohibit tandem transmission.
(Normally this setting is not necessary.)

Disabling of Slave Machine Mode

This setting is used to prohibit tandem reception.
(Normally this setting is not necessary.)

Disable Registration of Program

Disables the program registration.

Disabling of Bypass-Tray in Duplex Copy

Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special media for which 2-sided copying is prohibited.
If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result.
If special media for which 2-sided copying is prohibited is often used, it is recommended that you enable this setting.

Disabling of Auto Paper Selection

Disables the Auto Paper Selection function.
When this setting is enabled, automatic selection of paper that is the same size as the original on the document glass or in the automatic document feeder does not take place.

Disabling Registration of Custom Image

Disables the registration of custom images.

Disabling sending while copying

Disables the Image Send function during copy.

Prohibit Notice Page Printing

Disables to print a notice page.

Prohibit Test Page Printing

Disables to print the test page.
When this setting is enabled, "Printer Test Page" in Setting mode cannot be used to print test pages.

Exclude Bypass-Tray from Auto Paper Select

When [Auto] is selected for paper type selection, the bypass tray is excluded from the trays that can be selected.
This is recommended when special paper is often placed in the bypass tray.

Disabling of USB Memory Direct Print

Disables the function for directly printing of a file on a USB memory device.

Disabling of Network Folder Direct Print

Disables direct printing from a network folder.

Disabling sending while printing

Disables the Image Send function during printing.

Disable Switching of Display Order

Disables a change of display sequence (search number order, ascending, descending) in the address book and others.
If set, the display is not sorted even when you tap the tab on the address book screen.
The display order will remain fixed at the order that is in effect when this setting is enabled.

Disable Fax Broadcasting

Disables the facsimile broadcasting.

Disable Scan Function

If the [PC Scan] checkbox is set to , the PC Scan function is disabled.

Disable Registering Destination from Operation Panel

Disables address control from the machine.
Configure the setting for each of the following items:

• Group (Direct Entry)
• Group (Address Book)
• Contacts

Disable Registering Destination on Web Page

Disables to store the destination from Setting mode (Web version).
Configure the setting for each of the following items:

• Group (Direct Entry)
• Group (Address Book)
• Contacts

Disable All Program Item Registration

Disables the use of address book for all programs.

Disable Registration of Memory Box

Disables all types of memory box registration.
Configure the setting for each of the following items:

• Polling Memory
• Confidential
• Relay Broadcast (Direct Entry)
• Relay Broadcast (Address Book)

Disable Destination Registration Using Global Address Search

This disables address control from the global address search.
Configure the setting for each of the following items:

• E-mail
• Internet Fax
• FAX

Disable Registration Using Network Scanner Tool

This disables address control from the Network Scanner Tool.

Disabling of Forwarding via Network

This prohibits inbound routing.

These settings are used to disable the following transmission operations.

Disable [Resend] on Fax/Image Send Mode

This setting is used to prohibit the transmission that is activated by the [Select among addresses recently sent to] key on the action panel.

Disable Selection from Address Book

Disables the selection of destinations from the address book.
Configure the setting for each of the following items:

• E-mail
• FTP
• Desktop
• Network Folder
• Internet Fax (including Direct SMTP)
• FAX

Disable Direct Entry

Disables the direct entry of destination address and others.
Configure the setting for each of the following items:

• E-mail
• Network Folder
• Internet Fax (including Direct SMTP)
• FAX

Disable PC-I-Fax Transmission

This prohibits PC-I-Fax transmission.

Disable PC-Fax Transmission

This prohibits PC-Fax transmission.

Disabling Text/Stamp printing at Reprint

When a stored file is retrieved and printed, the printing functions are disabled.
This function prevents date inconsistencies between the original data, output data and others.

Batch Print Settings

When printing files by batch printing, this setting is used to prohibit the selection of the [All Users] key and the [User Unknown] key in the user selection screen.

Disable Storing to External Memory Device

Storing to external memory device is disabled.

This setting is used to set the security enhancement functions.

Hidden Pattern Print Setting

Disables the direct entry of background pattern and others.