PAPER LOADING ORIENTATION
Overview
When using the staple, punch or the paper folding function, the original must be placed as shown below to enable stapling or punching in the desired position on the paper.
Staple
| Touch panel key | Paper loading orientation | Result |
|---|---|---|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
- To use the staple function, you need to mount a finisher (large stacker) or saddle finisher (large stacker).
- To use the saddle stitch function, you need to mount a saddle finisher (large stacker).
Fold
| Touch panel key | Orientation | Result |
|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
- A folding unit is required to be installed in order to use paper folding functions other than saddle folds.
- To use the saddle fold function, you need to mount a saddle finisher (100-sheet stapling).
Punch
| Touch panel key | Orientation | Result |
|---|---|---|
 |
 |
 |
 |
 |
A punch module is required for paper punch.