TO CHANGE THE OUTPUT TRAY
Overview
The output tray is automatically selected based on the output function you set. If Z-Fold, Half Fold, or Punch is selected, you can select the middle or offset tray for the output tray.
Tap the [Upper Tray], [Middle Tray] or [Lower Tray] key in "Output Tray" and select the output tray you require.
Relation between output function and output tray
An output tray is automatically selected as shown below based on the output function you set. Depending on the output function that is originally deselected, it may be deselected if you tap the [Upper Tray], [Middle Tray] or [Lower Tray] key to change the output tray.For example, if you tap the [Upper Tray], [Middle Tray] or [Lower Tray] key with "Saddle Stitch" selected, the setting for "Saddle Stitch" is canceled.
| Output function | Deliver to | |
|---|---|---|
| Staple | Upper Tray or Lower Tray |
|
| Z-Fold/Half Fold/Punch | Upper Tray, Middle Tray, or Lower Tray | |
| Saddle Stitch/Saddle Fold | Saddle Stitch Tray (C) | |
| C-Fold/Accordion Fold/Double Fold | Folding Unit Tray (D) | |
