USING THE DOCUMENT GLASS FOR 2-SIDED COPYING

Overview

Dual-side copy helps to save paper.

To change the default 2-sided copy mode:

In "Setting mode", select [System Settings]→[Copy Settings]→[Initial Status Settings]→[2-Sided Copy].

Operation

Tap the [2-Sided Copy] key, and tap the [1-Side to 2-Side] key.

After the settings are completed, tap

Place the original on the document glass, and tap the [Preview] key.

DOCUMENT GLASS

The [2-Side to 2-Side] key and [2-Side to 1-Side] key cannot be used when copying from the document glass.

Set the next original, and tap the [Additionally Scan] key to scan the original.

Repeat this step until all originals have been scanned.

Make sure that the desired paper (tray) and color mode are selected.

To change the paper (tray), tap the [Paper Select] key.
- SELECTING THE PAPER TRAY FOR COPYING
To change the color mode, tap the [Color Mode] key.
- COPY COLOR MODES

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper tray manually.

Tap the [Color Start] or [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of copies.