OPERATIONS COMMON TO ALL MODES
INTERIOR
This section describes the names and functions of the respective parts inside the machine.
Toner cartridge
This cartridge contains toner. When the toner runs out in a cartridge, the cartridge of the color that ran out must be replaced.
- REPLACEMENT OF TONER CARTRIDGE
This cartridge contains toner. When the toner runs out in a cartridge, the cartridge of the color that ran out must be replaced.
- REPLACEMENT OF TONER CARTRIDGE
Fusing unit
Heat is applied here to fuse the transferred image onto the paper.
Heat is applied here to fuse the transferred image onto the paper.
The fusing unit is hot. Take care not to burn yourself when removing a misfeed.
Transfer belt
During full color printing, the toner images of the four colors on the photoconductive drums are combined together on the transfer belt.
During black and white printing, only the black toner image is transferred onto the transfer belt.
During full color printing, the toner images of the four colors on the photoconductive drums are combined together on the transfer belt.
During black and white printing, only the black toner image is transferred onto the transfer belt.
Do not touch or damage the transfer belt.
This may cause a defective image.
This may cause a defective image.
Right side cover
Open this cover to remove a misfeed.
Open this cover to remove a misfeed.
Paper reversing section cover
This unit is used for reversing paper when 2-sided printing is performed. Open this cover to remove a paper misfeed.
This unit is used for reversing paper when 2-sided printing is performed. Open this cover to remove a paper misfeed.
Bypass tray
Use this tray to feed paper manually.
When loading large-size paper, pull out the extension guide.
- LOADING PAPER INTO THE BYPASS TRAY
Use this tray to feed paper manually.
When loading large-size paper, pull out the extension guide.
- LOADING PAPER INTO THE BYPASS TRAY
Main power switch
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep this switch in the "
" position.
- TURNING ON THE POWER
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep this switch in the "
" position.- TURNING ON THE POWER
Waste toner box
This box collects excess toner that remains after printing.
- REPLACING THE WASTE TONER BOX
This box collects excess toner that remains after printing.
- REPLACING THE WASTE TONER BOX
A service technician collects replaced waste toner boxes.
Waste toner box release button
Press this button when you need to release the waste toner box lock to replace the waste toner box or clean the laser unit.
- CLEANING THE LASER UNIT
- REPLACING THE WASTE TONER BOX
Press this button when you need to release the waste toner box lock to replace the waste toner box or clean the laser unit.
- CLEANING THE LASER UNIT
- REPLACING THE WASTE TONER BOX
Handle
Pull this out and grasp it when moving the machine.
Pull this out and grasp it when moving the machine.
A stand/1x500/2x500 sheet paper drawer right-side cover (when a stand/1X500/2x500 sheet paper drawer is installed)
Open this cover to remove a paper misfeed in tray 3 or 4.
Open this cover to remove a paper misfeed in tray 3 or 4.
Paper tray right side cover
Open this to remove a paper misfeed in tray 1 or 2.
Open this to remove a paper misfeed in tray 1 or 2.
Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to open the right side cover.
To remove a paper misfeed, pull and hold this lever up to open the right side cover.
