First, tap the [Copy] icon on the home screen to enter the Copy mode.
1 Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
2 Scan the original.
Tap the [Preview] key to scan the original.
  • To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
  • When not checking the preview image, tap the [Color Start] or [B/W Start] key to start copying.
02002002.jpg
3 Check the preview image.
Display the preview image of the scanned original.
in the preview screen, check the settings such as color, 2-sided copy, or staple position.
02002007.jpg
4 Start copying.
Tap the [Color Start] or [B/W Start] key.
When making only one set of copies, you do not need to specify the number of copies.
  • To make two or more sets of copies:
    Tap the copies display key to specify the number of copies.

  • To cancel all settings, tap the [CA] key.
    When the [CA] key is tapped, all settings selected to that point are cleared and you will return to the base screen.
    • To cancel copying:
      Tap the [STOP] key.
Before starting copying, tap the [File] key or [Quick File] key on the action panel to save the scanned original as data.