Tap the [Others>>] key, and tap the [Position Image] key.
Sets a movement distance.
  • Tap the area indicating the movement distance on the front or reverse side, and enter the distance using numeric keys.
  • To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with .
  • If you set the [Adjust 2nd pg value to 1st.] checkbox to , goes out and you can set sides 1 and 2 separately.
02064001.jpg
After the settings are completed, tap and [<<Back] keys in sequence.
To cancel the Position Image setting:
Tap the [Clear] key.
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
To make two or more sets of copies:
Tap the copies display key to specify the number of copies.