Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
  • AUTOMATIC DOCUMENT FEEDER
  • Document Glass
Specify the destination.
If the sub-address and passcode are stored in the one-touch key, it is not necessary to take steps 3 to 6. Go to step 7.
Tap the [Sub Address] key.
Enter "/".
Enter the sub-address using the numeric keys.
Tap the [Sub Address] key.
Enter "/".
If a passcode has been omitted in the memory box of the destination machine, it is not necessary to take steps 6 and 7.
Enter the passcode using the numeric keys.
Tap the [Start] key.
Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
Scanning of the original starts.
  • If you inserted the original pages in the document feeder tray, all pages are scanned.
    A beep will sound to indicate that scanning and transmission have ended.
  • If you placed the original on the document glass, scan each page one at a time.
    When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and then tap the [Read-End] key.
    A beep will sound to indicate that transmission has ended.