This function enables your machine to call another machine and initiate reception of a fax stored in an F-code memory box (polling memory) in the other machine. During the polling operation, your machine must correctly specify the F-code (sub-address and passcode) configured in the other machine. Otherwise, polling reception will not take place.
  • Verify the F-code (sub-address and passcode) of the memory box in the other machine before you perform F-code polling reception.
  • The receiving machine bears the telephone charges of the transmission.
  • If necessary, use the F-code polling reception in combination with a broadcast transmission or timer transmission. Only one polling reception with a timer setting can be stored at a time.
  • Polling multiple machines (serial polling) is not possible.
  • Make sure there is no original in the machine when using the F-code for the polling reception function.
  • The polling reception using the F-code cannot be registered as a "favorite" item.