Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Specify the destination fax number.
Tap the [Others >>] key, and tap the [Timer] key.
Tap the [On] key.
Specify the date.
04066001.jpg
Specify the time (hour and minute) in 24-hour format.
  • Tap the areas displaying the hour and minute respectively, and enter the values using the numeric keys.
  • It is convenient to use to finely adjust the time.
  • The setting will show the current time. If the time is not correct, press the [CA] key to cancel the operation. Correct the time in setting mode and then perform the timer transmission procedure.
To cancel the Timer Transmission settings:
Tap the [Off] key.
After the settings are completed, tap .
Tap the [Start] key to start scanning of the original.
Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
  • If you inserted the original pages in the document feeder tray, all pages are scanned.
    A beep will sound to indicate that scanning has ended, and the machine stands by for transmission.
  • If you placed the original on the document glass, scan each page one at a time.
    When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and then tap the [Read-End] key.
    A beep will sound to indicate that scanning has ended, and the machine stands by for transmission.
The original is scanned into memory. The original cannot be scanned at a specified time.