F-CODE POLLING RECEPTION

Overview

You can poll another machine and receive an original from the F-code Memory Box (Polling Memory) of that machine. You need to enter the F-code (consisting of the sub-address and passcode) of the original being stored on the other machine.

  • First, check the F-code (the sub-address and passcode) being set in the F-code Memory Box of the other machine.
  • The communication is charged on your machine.
  • You can use the F-code Polling Reception together with the Timer Transmission when necessary. Only a single polling reception can be specified.
  • You cannot poll multiple destinations (Serial Polling) for document reception.
  • Do not place an original on the machine when you use the F-code Polling Reception.
  • You cannot register the F-code Polling Reception in the Favorite.

Operation

  1. Tap the [Others] key, and tap the [Polling] key

    A checkmark appears on the icon.
    After the settings are completed, tap .
    To cancel the polling setting:
    Tap the [Polling] key to clear the checkmark.

  2. Specify the destination fax number

    1. (1) Enter the destination line number using the numeric keys.
    2. (2) Tap the [Sub Address] key.
      Symbol "/" is entered.
    3. (3) Enter the sub-address using the numeric keys.
    4. (4) Tap the [Passcode] key.
      Symbol "/" is entered.
    5. (5) Enter the passcode using the numeric keys.
    • If the sub-address and passcode are already registered, you can select a one-touch key as well.
    • If the passcode is omitted for the memory box of destination machine, you can skip Steps (4) and (5).

  3. Tap the [Start] key

    When communication is established with the other machine, the document is received.
Back to top