DIRECTLY PRINTING A FILE ON A USB MEMORY

Overview

You can print a file on a USB memory connected to the machine directly without using the computer.
When you select a password-protected PDF file, enter the password in the job management screen to begin printing.
  • Use a FAT32 USB memory device with a capacity of no more than 32 GB.
  • Printing from a USB memory device is not possible when [System Settings] in "Setting mode (administrator)" → [Printer Settings] → [Default Settings] → [Disabling of USB Memory Direct Print] is selected.

Operation

  1. 2

    Connect the USB memory device to the machine and tap the [HDD File retrieve] key

  2. 2

    Tap the [Select File from USB Memory to Print] key on the action panel

  3. 2

    Tap the file that you wish to print, and tap the [Choose Print Settings] key on the action panel

    • When printing multiple files, tap all the files you wish to print, and tap the [Print] key on the action panel.
    • The checkboxes of the selected files are selected.
    • The icon icon appears to the left of the keys of files that can be printed.
    • The icon icon is displayed to the left of keys of folders in the USB memory device. To display a folder or a file in a folder, tap this key.
    • A total of 100 keys of files and folders can be displayed.
    • Tap icon to move up one folder level.
    • When you move down a folder level by tapping a folder key, icon appears.
      Tap this key to return to the file or folder name selection screen.
    • Tap the [File or Folder Name] key to change the order of the files and folders displayed on the screen. Each time the key is tapped, the order changes between ascending and descending.
  4. 2

    Select the print conditions

    • If you have selected multiple files in step 3, you can only select the number of prints.
    • If you have selected a file that includes print conditions (i.e., PCL, PS, or XPS files) in step 3, the settings will be applied.
    When the [Print Glossy] checkbox is selected, [Paper Area] is set to [Glossy Paper] (bypass tray) and [Resolution] is set to [600 dpi (High Quality)].
  5. 2

    Tap the [Start] key

    Printing begins after the selected file is transferred.
  6. 2

    Remove the USB memory device from the machine

Back to top