Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
If the originals are 2-sided, place them in the document feeder tray.
Tap the [Others>>] key, and tap the [Pamphlet Copy] key.
Select the binding edge.
To cancel the pamphlet staple settings
Tap the [Off] key.
Tap the [1-Sided] or [2-Sided] key to meet the original.
When not inserting a cover, go to step 6.
02026001.jpg
When inserting a cover, tap the [Cover Setting] key, and tap the [On] key.
  • To change the cover input tray:
    • Tap the [Paper Tray] key to display the tray selection screen.
    Tap the cover input tray on the tray selection screen.
    For more information, see "SELECTING THE PAPER TRAY FOR COPYING".
  • To make a copy on a cover sheet, check the [Make Copy on Cover (Duplex)] box so that appears.
If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used.
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:
Tap the [CA] key.
Tap the [Multi Shot] key on the action panel.
Tap the key of the multi shot type sheets you wish to use.
If needed, the images will be rotated.
To cancel the 2in1, 4in1 setting:
Tap the [Off] key.
Select the layout.
Select the border.
A line can be inserted between pages arranged on a sheet.
After the settings are completed, tap and [<<Back] keys in sequence.
02027001.jpg
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:
 Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
To make two or more sets of copies:
Tap the copies display key to specify the number of copies.