Place the original on the document glass.
When faxing a multi-page original, scan each page in order starting from the first page.
Specify the destination fax number.
If you have another page to scan, change pages and then tap the [Start] key.
Repeat until all originals have been scanned.
If no action is taken for one minute, scanning automatically ends and the transmission is reserved.
Tap the [Read-End] key.
A beep sounds.
Open the automatic document feeder and remove the original.
04035002.jpg
To cancel scanning:
Tap the [STOP] key before the [Read-End] key is tapped.
  • When scanning is completed, "Job stored." will be displayed together with a job control number.
    This number can be used to locate the job in the Transaction Report or in the Image Sending Activity Report.
  • If no action is taken for one minute after the confirmation screen is displayed, scanning automatically ends and the transmission is reserved.
  • The [Change Setting] key can be tapped, if necessary, to change the exposure, resolution, scan size, and send size for each original page scanned. However, when "2in1" or "Card Shot" is selected in Others, only the exposure can be changed when scanning an even-numbered original page.