Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Specify the destination.
If the sub-address and passcode are stored in the one-touch key, it is not necessary to take steps 3 to 5. Go to step 6.
Tap the [Sub Address] key.
Enter "/".
Enter the sub-address using the numeric keys.
Tap the [Sub Address] key.
Enter "/".
If a passcode has been omitted in the memory box of the destination machine, it is not necessary to take steps 6 and 7.
Tap the [Start] key.
Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
Scanning begins.
  • If you inserted the original pages in the document feeder tray, all pages are scanned.
    A beep will sound to indicate that scanning and transmission have ended.
  • If you placed the original on the document glass, scan each page one at a time.
    When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and then tap the [Read-End] key.
    A beep will sound to indicate that scanning and transmission have ended.
    When the relay machine receives the fax, it will automatically transfer the fax to the destination machines programmed in the memory box.