Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.
  • Place the original of the 5-1/2" x 8-1/2" (A5) size in the portrait orientation ().
    If placed in landscape (horizontal) orientation (), an incorrect size will be detected.
    For an 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually.
  • Rotation sending
  • 8-1/2" x 11" and 5-1/2" x 8-1/2R (A4, B5R and A5R) originals are rotated 90 degrees, and respectively sent in the 8-1/2" x 11"R and 5-1/2" x 8-1/2 (A4R, B5 and A5) orientations.
    (Rotation sending is not available for originals with 8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) size.)
Specify the destination.
The icon appears in one-touch keys in which Internet fax addresses are stored.
To change [Subject], [File Name], or [Body Text], tap its entry field, or tap [Others>>] and [Send Settings].
  • CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT AT THE TIME OF INTERNET FAX TRANSMISSION
Tap the [Original] key.
You can change exposure, resolution, file format, color mode, and other settings.
Tap the appropriate orientation key.
After the settings are completed, tap .
05030002.jpg
Tap the [Start] key to start scanning of the original.
Tap the [Preview] key to check the preview of an image before sending the original.
  • If the original is placed on the document glass, the [Read-End] key appears in the touch panel.
    If the original is only one page, go to step 8. To scan more pages, go to the next step.
  • If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission will take place.
If the original was placed on the document glass, replace it with the next original and tap the [Start] key.
Repeat until all originals have been scanned.
Tap the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
  • If no action is taken for one minute after the confirmation screen is displayed, scanning automatically ends and the transmission is reserved.
  • Tap the [Change Setting] key to change the exposure, resolution, scan size, and send size for each original page scanned.
    However, when "2in1" or "Card Shot" is selected in Others, only change the exposure when scanning an even-numbered original page.