Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Specify the destination.
Tap the [Others>>] key, and tap the [Suppress Background] key.
Tap the [On] key.
Tap or slide the slider to adjust the range to be suppressed.
To cancel the background suppression settings:
Tap the [Off] key.
After the settings are completed, tap and [<<Back] keys in sequence.
05054001.jpg
Tap the [Start] key to start scanning of the original.
Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see "CHECKING THE IMAGE TO BE TRANSMITTED". However, settings for this function cannot be changed in the preview screen.
  • If you inserted the original pages in the document feeder tray, all pages are scanned.
    A beep will sound to indicate that scanning and transmission have ended.
  • If you placed the original on the document glass, scan each page one at a time.
    When scanning finishes, place the next original and tap the [Start] key.
    A beep will sound to indicate that transmission has ended.
When the color mode setting is [Mono2], the suppress background function will not operate.