USING THE DOCUMENT GLASS FOR AUTOMATIC 2-SIDED COPYING

Overview

A 2-sided copy helps to save paper.

To change the default 2-sided copy mode:

In "Setting mode (administrator)", select [System Settings] → [Copy Function Settings] → [Initial Status Settings] → [2-Sided Copy].

Operation

1. 

   Tap the [2-Sided Copy] key, and tap the [1-Sided->2-Sided] key

   After the settings are completed, tap .

   

   To make 2-sided copies of a 1-sided portrait original placed horizontally, set the [Rotate back face 180 deg] checkbox to .

   The [2-Sided->2-Sided] key and [2-Sided->1-Sided] key cannot be used when copying from the document glass.
2. 

   Place the original on the document glass, and tap the [Preview] key

   • DOCUMENT GLASS
3. 

   Place the next set of originals and tap the [Additional Scan] key

   Repeat this step until all originals have been scanned.
4. 

   Check that the paper to be used is selected

   

   When changing paper, see the following items.

   • SETTING THE PAPER TRAY
   • SETTING THE BYPASS TRAY

   Depending on the original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper tray manually.
5. 

   Tap the [Start] key to start copying

   

   To make two or more sets of copies:

   Tap the copies display key to specify the number of copies.