INITIATING POLLING RECEPTION MANUALLY
Overview
Use the manual polling reception when you must start polling after listening to a recorded greeting, such as when using a fax information service.
![](../images/ic_Limit.png)
- Make sure there is no original in the machine when using the polling reception function.
- This function cannot be used to poll multiple machines (serial polling).
- The function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
![](../images/ic_Memo.png)
Operation
![](../images/step_01.jpg)
You will hear the dial tone through the machine's speaker.
![](../images/step_02.jpg)
- ENTERING A DESTINATION NUMBER USING THE NUMERIC KEYS
- RETRIEVING A DESTINATION NUMBER FROM AN ADDRESS BOOK
- THE SELECTED DESTINATIONS
- USING A SEARCH NUMBER TO RETRIEVE A DESTINATION
- RETRIEVING A DESTINATION NUMBER FROM A GLOBAL ADDRESS BOOK
- USING A TRANSMISSION LOG TO RESEND
- SENDING BY CHAIN DIALING
![](../images/ic_Limit.png)
![](../images/ic_Memo.png)
![](../images/step_03.jpg)
A checkmark appears on the icon.
![](../images/ic_Limit.png)
Tap the [Polling] key to clear the checkmark.