TRANSMISSION USING THE SPEAKER
Overview
When the speaker is used to dial, the fax is sent after the number is dialed and the connection is established.
![](../images/ic_Limit.png)
- If a person answers, you will be able to hear his or her voice, but you will not be able to speak.
- When the speaker is used, transmission takes place without scanning the original into memory.
- A destination that includes an F-code (sub-address and passcode) cannot be used.
- A one-touch key that has multiple destinations or has a non-fax destination cannot be used.
- In speaker mode, the [Preview] key cannot be used for transmission.
Operation
![](../images/step_01.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_02.jpg)
When the connection is established, you will hear the dial tone through the machine's speaker.
![](../images/ic_Memo.png)
![](./icon/KEY_VKEY_V.jpg)
![](../images/step_03.jpg)
![](../images/ic_Limit.png)
![](../images/step_04.jpg)
![](../images/ic_Limit.png)
To cancel transmission:
To stop transmission, tap the [Stop] key. To stop communication, tap the [Speaker] key.