EXTERIOR
This section describes the names and functions of the respective parts on the exterior of the machine.
Click or tap the numbers to make its details pop up.
Click or tap the numbers to make its details pop up.
Finisher (large stacker)
This staples paper. A punch module can also be installed to punch holes in output paper.
- FINISHER (LARGE STACKER)
This staples paper. A punch module can also be installed to punch holes in output paper.
- FINISHER (LARGE STACKER)
Saddle finisher (large stacker)
This staples and folds paper. A punch module can also be installed to punch holes in output paper.
- SADDLE FINISHER (LARGE STACKER)
This staples and folds paper. A punch module can also be installed to punch holes in output paper.
- SADDLE FINISHER (LARGE STACKER)
Saddle finisher
This staples and folds paper. A punch module can also be installed to punch holes in output paper.
- SADDLE FINISHER
This staples and folds paper. A punch module can also be installed to punch holes in output paper.
- SADDLE FINISHER
Output tray (center tray)
Printed paper is output into this tray.
Printed paper is output into this tray.
Automatic document feeder
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be automatically scanned at one time.
- AUTOMATIC DOCUMENT FEEDER
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be automatically scanned at one time.
- AUTOMATIC DOCUMENT FEEDER
USB port (A type)
This is used to connect a USB device such as a USB memory device to the machine. For the USB cable, use a shielded cable.
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as a USB memory device to the machine. For the USB cable, use a shielded cable.
Supports USB 2.0 (Hi-Speed).
Front cover
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
- TURNING ON THE POWER
- REPLACING THE TONER CARTRIDGE
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
- TURNING ON THE POWER
- REPLACING THE TONER CARTRIDGE
Operation panel
This panel hosts the [Power] button, [Power Save] button/indicator, [Home Screen] button, main power button and touch panel.
Use the touch panel to operate each of these functions.
- OPERATION PANEL
This panel hosts the [Power] button, [Power Save] button/indicator, [Home Screen] button, main power button and touch panel.
Use the touch panel to operate each of these functions.
- OPERATION PANEL
Keyboard
Use this as a substitute for the soft keyboard displayed on the touch panel. When not being used, it can be stored under the operation panel.
Use this as a substitute for the soft keyboard displayed on the touch panel. When not being used, it can be stored under the operation panel.
Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, pull out the extension guide.
- LOADING PAPER INTO THE BYPASS TRAY
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11"R or A4R, pull out the extension guide.
- LOADING PAPER INTO THE BYPASS TRAY
Tray 5 (MX-LC16)
Store paper in this tray. Up to 3,000 sheets(12"×18") can be stored.
-LARGE CAPACITY TRAY
Store paper in this tray. Up to 3,000 sheets(12"×18") can be stored.
-LARGE CAPACITY TRAY
Tray 5 (MX-LC15)
Store paper in this tray. Up to 3,500 sheets(8-1/2"×11") can be stored.
-LARGE CAPACITY TRAY
Store paper in this tray. Up to 3,500 sheets(8-1/2"×11") can be stored.
-LARGE CAPACITY TRAY
Finisher
This staples paper. A punch module can also be installed to punch holes in output paper.
- FINISHER
This staples paper. A punch module can also be installed to punch holes in output paper.
- FINISHER
Punch module
This is used to punch holes in output. Requires a saddle finisher, saddle finisher (large stacker), or finisher (large stacker).
- PUNCH MODULE
This is used to punch holes in output. Requires a saddle finisher, saddle finisher (large stacker), or finisher (large stacker).
- PUNCH MODULE
Inserter
Covers and insertion sheets to be inserted into printed sheets can be loaded.
Using the manual finishing function, you can directly feed paper into the finisher or saddle finisher to staple, punch or fold the paper.
Covers and insertion sheets to be inserted into printed sheets can be loaded.
Using the manual finishing function, you can directly feed paper into the finisher or saddle finisher to staple, punch or fold the paper.
Curl correction unit
This punches and outputs paper.
This punches and outputs paper.
Folding unit
This folds and outputs paper.
This folds and outputs paper.
Punch module
This is used to punch holes in output. Requires a saddle finisher, saddle finisher (large stacker), or finisher (large stacker).
- PUNCH MODULE
This is used to punch holes in output. Requires a saddle finisher, saddle finisher (large stacker), or finisher (large stacker).
- PUNCH MODULE
Trimming module
This trims the excess of saddle-stitched output.
This trims the excess of saddle-stitched output.