REPEATING THE SAME IMAGE ON ONE SHEET (REPEAT LAYOUT)

Overview

This function copies multiple same original images on one sheet.
There are three ways; "Auto""Fixed Repeat" and "Photo Repeat".

Auto
The maximum repeat count to copy images on a sheet is calculated automatically according to the original size, paper size, and copy ratio.
Fixed Repeat
When you select a repeat count, original size, and paper size to copy images on a sheet, the copy ratio is calculated automatically and the original is copied.
Photo Repeat
This function repeatedly copies on 8-1/2" × 11" (A4) or 11" × 17" (A3) papers without changing the copy ratio of the photo size original. You can select any of the following five types of original size:
  • Original sizes up to 3" × 5"(130 mm × 90 mm)
  • Original sizes up to 2-1/2" × 4"(70 mm × 100 mm)
  • Original sizes up to 2-1/8" × 3-5/8"(57 mm × 100 mm)
  • Original sizes up to 5" × 7"(100 mm × 150 mm)
  • Original sizes up to 2-1/2" × 2-1/2"(65 mm × 70 mm)
  • Repeat Layout must be specified before scanning the original.
  • Always place an original on the document glass for photo repeating.
This function cannot be combined with mixed size originals or 2-sided copying mode (it can be combined with [2-Sided->1-Sided]).

Operation

Auto

Repeat count is calculated automatically for copying.
  1. 2

    Tap the [Others] key, and tap the [Repeat Layout] key

  2. 2

    Tap the [Auto] key

  3. 2

    Check the repeat faces that have been calculated automatically

    If necessary, tap the [Original], [Paper Select], or [Copy Ratio] key, and configure the setting again.
  4. 2

    Specify the repeat partition line

    After the settings are completed, tap icon and the [Back] key in sequence.
    To cancel the auto setting:
    Tap the [Off] key.
  5. 2

    Place an original, and tap the [Preview] key

    Place the original in the automatic document feeder or on the document glass.
  6. 2

    Check the preview image in the preview screen

    To cancel all settings:
    Tap the [CA] key.
  7. 2

    Tap the [Start] key to start copying

    To make two or more sets of copies:
    Tap the copies display key to specify the number of copies.

Fixed Repeat

Specify the repeat count for copying.
  1. 2

    Tap the [Others] key, and tap the [Repeat Layout] key

  2. 2

    Tap the [Fixed Repeat] key

  3. 2

    Tap the [Original] and [Paper Select] keys to select an original size and a paper size, respectively

  4. 2

    Tap the [No. of Faces] key to set a repeat count

    After the settings are completed, tap icon. The automatic calculation result is shown as the copy ratio.
    If the calculated copy ratio exceeds the range from 25% to 400%, an error occurs.
  5. 2

    Specify the repeat partition line

    After the settings are completed, tap icon and the [Back] key in sequence.
    To cancel the fixed repeat setting:
    Tap the [Off] key.
  6. 2

    Place an original, and tap the [Preview] key

    Place the original in the automatic document feeder or on the document glass.
  7. 2

    Check the preview image in the preview screen

    To cancel all settings:
    Tap the [CA] key.
  8. 2

    Tap the [Start] key to start copying

    To make two or more sets of copies:
    Tap the copies display key to specify the number of copies.

Photo Repeat

Repeat a photo size original in actual size.
  1. 2

    Tap the [Others] key, and tap the [Repeat Layout] key

  2. 2

    Tap the [Photo Repeat] key

  3. 2

    Tap the [Original] key and select an original size

    Place the original to meet the orientation displayed in "How To Set".
    After the settings are completed, tap icon.
  4. 2

    Tap the [Paper Select] key and select a paper size

    After the settings are completed, tap icon and the [Back] key in sequence.
    If you tapped [Up to 57x100 mm(Card) 2 1/8 × 2 5/8"] in the [Original] screen, only the A4 original size can be selected.
    To cancel the photo repeat setting:
    Tap the [Off] key.
  5. 2

    Place the original on the document glass, and tap the [Preview] key

    You can check the original direction by reading the "Orientation" in the Original screen.
  6. 2

    Check the preview image in the preview screen

    To cancel all settings:
    Tap the [CA] key.
  7. 2

    Tap the [Start] key to start copying

    To make two or more sets of copies:
    Tap the copies display key to specify the number of copies.
Back to top