FAX TRANSMISSION SEQUENCE
First, tap the [Fax] icon on the home screen to enter fax mode.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
.jpg)

Tap the numeric keys to enter the destination number directly, or search and retrieve the address book or number.

Specify the original scan size, exposure, resolution, etc.
If necessary, you can refer to the following functions for the setting.

- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL(2-SIDED ORIGINAL)
- AUTO DETECTION
- SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE
- SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
- SPECIFYING THE SEND SIZE OF THE IMAGE
- CHANGING THE EXPOSURE
- CHANGING THE RESOLUTION
- SENDING A LARGE NUMBER OF PAGES(JOB BUILD)
- SENDING A THIN ORIGINAL(SLOW SCAN MODE)
- SENDING ORIGINALS OF DIFFERENT SIZES(MIXED SIZE ORIGINAL)
- CHECKING THE NUMBER OF SCANNED ORIGINAL SHEETS BEFORE TRANSMISSION(ORIGINAL COUNT)

Use Others other than the time when using scan settings such as sending two pages as a single page or sending originals of different sizes at the same time.


Tap the [Start] key.

- You can check the preview image by tapping the [Preview] key before tapping the [Start] key. After you have scanned an original by tapping the [Preview] key, tap the [Additional Scan] key to scan the next original.
- If you tap the [File] key or [Quick File] key on the action panel before starting fax transmission, you can save the scanned original as data.
- If you placed the original on the document glass, carry out the following procedure to send a fax.
- When sending a fax normally (memory transmission)
Repeat the steps for placing and scanning the originals the same number of times as there are originals. After scanning all originals, tap the [Read-End] key. (After you have scanned an original by tapping the [Preview] key, tap the [Additional Scan] key to scan the next original. Then, tap the [Start] key to send the original.) - When sending a fax in direct transmission mode
Multi-page originals cannot be scanned in direct transmission mode. Tap the [Start] key to start transmission.
- When sending a fax normally (memory transmission)
- When sending a fax in direct transmission mode
Multiple originals cannot be scanned in direct transmission mode. Tap the [Start] key to start transmission.